Acceptance requirements for embedded Stay Wire Assembly Fititngs:
1. The position, elevation and length of the exposed foundation of the embedded Stay Wire Assembly Fititngs should meet the requirements of the construction drawings.
2. The nuts and washers of Stay Wire Assembly Fititngs are matched, and the threads and nuts of the embedded Stay Wire Assembly Fititngs should be well protected.
3. T-shaped head Stay Wire Assembly Fititngs and the base board should be used according to the specifications. The buried T-shaped head Stay Wire Assembly Fititngs base board should be firm and flat. The Stay Wire Assembly Fititngs polished rod part and the base board should be painted with anti-rust paint.
4. The strength of the foundation concrete for installing the expansion anchor Stay Wire Assembly Fititngs shall not be less than 10MPa, and the expansion anchor Stay Wire Assembly Fititngs shall not be used for the cracked parts of the foundation concrete or reinforced concrete.
