The anchor bolts of Stay Wire Assembly Fititngs are aliases for stiffening anchor plates Stay Wire Assembly Fititngs, Welded Stay Wire Assembly Fititngs, Anchor Type Stay Wire Assembly Fititngs, Rib Type Stay Wire Assembly Fititngs, Anchor Bolts, Anchor Screws, Anchor Wire Wait. It is specially designed to be buried in the concrete foundation and used as the base for fixing various machines and equipment.
The 7-character Stay Wire Assembly Fititngs is one of the more commonly used Stay Wire Assembly Fititngs. Generally, it is made of Q235 steel, and the high-strength materials are processed with Q345B or 16Mn materials. 40Cr materials are also used to process 8.8-strength products, and occasionally they are processed with secondary or tertiary rebar.
Stay Wire Assembly Fititngs have different forms of wool, thick rod, and thin rod. Wool, the raw material steel, is directly processed from round steel or wire without modification; thick rods, or called A-type, and thin rods, or B-type, are all processed from steel into corresponding rod diameters. Welded Stay Wire Assembly Fititngs are made by welding stiffened iron plates with single-head bolts.
Stay Wire Assembly Fititngs has strong pull-out resistance. According to different conditions of use, it can reach 3.6, 4.8, 6.8, and 8.8 levels respectively. The tensile capacity of the 3.6-level 7-character Stay Wire Assembly Fititngs is the tensile capacity of the steel itself. The size equal to the cross-sectional area multiplied by the tensile strength design value (140MPa) is the allowable tensile capacity during design. The tensile strength of Stay Wire Assembly Fititngs processed directly from Q345B or 16Mn raw materials can reach a tensile strength of 5.8. The tensile strengths of 4.8, 5.8, 6.8 and 8.8 refer to the mechanical properties specified in GB/T3098.1.
